Ready to use high-quality Italian keratin powder at low prices

Italian Extra Strong Hold Keratin is the highest quality! The most durable keratin glue on the market to use for hair extension installation or rebonding old hair extension strands. This keratin is 100% genuine Italian and will last at least 6 months. The blond keratin will suit the brown color hair extension. This keratin is easy to melt using a hair extension heat fusion iron/connector or melting pot. This quality of keratin will not damage hair and will not disintegrate rapidly when washing hair, swimming, or during general use. This Italian keratin glue is the strongest, Non-Slip hair extension glue available.

View this post on Instagram

A post shared by Italian Keratin (@italiankeratin)

Our Italian keratin is 100% suitable for heat fusion

Best Quality on the market – We guarantee that! We provide the best quality Italian keratin to our customers and partners. We work with you and for you. Italian Keratin glue is the hardest, most durable glue available. It is resistant to high temperatures and will not soften when wet. Italian Keratin can be used with stick/I-Tip, Nail/U-Tip, V-Tip, and Flat-Tip hair extensions. Keratin glue is applied using a hair extension hot fusion connector or heat glue pot. Removed easily with a hair extension remover, use to bond strands of raw human hair or synthetic hair. 100% Genuine Quality Italian Keratin is extra stronghold clear glue / Keratin grains with the highest quality, will not slip if applied properly and can last up to 6 months. Made in Italy, once you experience genuine Italian bonding glue you will know the difference.

Italian Keratin Powder: The Ultimate Solution for Hair Extensions

Enhance your hair extensions with the luxurious and high-performance Italian Keratin Powder. Specifically formulated for seamless and durable application, our keratin powder is your go-to choice for achieving flawless, long-lasting hair extensions.

Why Choose Italian Keratin Powder for Hair Extensions?

1. Superior Bonding Strength: Our Italian Keratin Powder offers unparalleled bonding strength, ensuring that your hair extensions stay securely in place. The keratin forms a robust, yet flexible bond that withstands daily wear and tear.
2. Invisible, Natural Look: Create hair extensions that blend seamlessly with your natural hair. The keratin powder forms nearly invisible bonds, giving you a flawless, natural look that’s hard to detect.
3. Gentle on Hair: Protect your natural hair with our gentle keratin formula. It minimizes damage and stress on your hair, allowing you to enjoy beautiful extensions without compromising the health of your own locks.
4. Heat and Water Resistant: Designed to withstand everyday activities, our keratin bonds are both heat and water resistant. Enjoy swimming, styling, and washing your hair without worrying about your extensions slipping or loosening.
5. Easy Application and Removal: Italian Keratin Powder melts quickly and evenly, making the application process smooth and efficient. When it’s time for a change, the bonds can be easily dissolved with keratin bond remover, allowing for hassle-free removal and reapplication.
6. Long-Lasting Durability: Enjoy the longevity of your extensions with keratin bonds that last. Our powder ensures that your extensions remain intact and beautiful for months, providing a cost-effective solution for maintaining your desired look.
7. Safe and Non-Toxic: Made from high-quality, non-toxic ingredients, our keratin powder is safe for both your hair and scalp. It’s a trusted choice for professional stylists and at-home users alike.

Transform your hair extensions experience with Italian Keratin Powder. Whether you’re a professional stylist or a DIY enthusiast, our keratin powder provides the reliability and performance needed to achieve stunning, natural-looking extensions.

Elevate your style and enjoy the confidence of beautiful, secure hair extensions with Italian Keratin Powder. Your hair deserves nothing but the best.

Step-by-Step: How to use Italian Keratin Powder

Before you start — what this product is / quick facts

• Ready-mixed Italian keratin powder for heat-fusion hair extensions. Made in the EU, extra-strong, heat- and water-resistant.
• Melting point: 180°C (350°F). Use a fusion iron/connector or melting pot set appropriately.
• Yield: With 50 g of powder you can make ~1000 keratin strands
• Compatible with K-Tip, I-Tip, U-Tip, V-Tip and Flat-Tip (and similar) extension methods; removable with keratin bond remover.

Tools & supplies you’ll need

• Italian keratin powder (chosen color from our website)
• Hot fusion connector (heat fusion iron) or melting pot designed for keratin bonding
• Prebonded extension tips (I-Tip, U-Tip, V-Tip, Flat-Tip) or loose hair to rebond
• Extension pliers / loop tool (depending on method)
• Heat-resistant tweezers or applicator rod
• Fine rat-tail comb and sectioning clips
• Heat-resistant mat / silicone pad
• Keratin bond remover (for future removal)
• Disposable gloves, protective goggles (recommended), and good ventilation

Prep steps

1. Work area & safety: Clean, well-lit workspace; ventilate room. Place a heat-resistant mat where you’ll work. Put on gloves.
2. Color match: Pick the keratin color closest to the client’s hair (you have multiple small colors to test). Test a small strand to confirm blending. You can mix different colors and types of keratin to match perfect color for your clients
3. Set tools: If using a fusion iron, preheat it to around 180°C / 350°F (the product’s best melting point). If using a melting pot, preheat to the same target. Allow the tool to reach stable temp before melting any keratin.
4. Prepare hair: Wash the client’s hair with clarifying shampoo (no conditioner), towel dry — hair should be clean and completely dry for best bonding.

Application — making keratin bonds

1. Portion the keratin powder (if using a melting pot): Place the desired color powder into the melting pot or into the iron’s reservoir per your melting pot instructions. The product is ready-mixed so no extra binder required.
2. Melt carefully: Melt until the keratin forms a smooth molten bead — avoid overheating above recommended temp. Stir gently (if pot) to eliminate air pockets. Do not exceed tool manufacturer temp limits.
3. Section the hair: Take a 1–2 mm section of natural hair (size depends on extension weight), clip rest away. Smaller sections = more natural result.
4. Form the bond on the tip (method A — prebonded tip):
   1. Thread the natural hair through the loop or position the prebonded tip next to the natural strand.
   2. Press the prebonded keratin tip into the molten keratin briefly (if remelting tips) or apply a small bead of molten keratin to the extension tip.
   3. Use the fusion iron to heat the keratin bond junction for 1–2 seconds (follow your connector’s instructions). Immediately roll the molten ball between your fingers (use a protector pad) or with tweezers to shape a small, smooth dome that firmly clamps the natural hair and tip together.
5. Form the bond on the strand (method B — rebonding/creating tips):
   1. Wrap the extension strand around a small amount of molten keratin, then compress and shape with the fusion iron or shaping tool to form a neat bond.
   2. Allow to cool & set: Hold the bond steady until cool (couple seconds). The keratin should harden into a firm, slightly flexible bond.
   3. Check security: Gently tug the extension — it should hold firmly without slipping. If loose, reheat and reshape or add a tiny bit more keratin.
   4. Repeat: Continue section by section until desired volume/coverage achieved. Remember: with 50 g you can make many strands — pace yourself.
   5. Finish: Comb through lightly; style as desired. Keratin bonds are heat- and water-resistant so normal styling is fine, but avoid high heat directly on the bond.

Removal

Use a keratin bond remover specially formulated to dissolve keratin bonds. Apply per remover instructions, gently slide the bond off, and remove residue. The product page explicitly states the bonds can be removed with a remover.

Troubleshooting & common mistakes

1. Bonds slipping: Usually caused by underheating or dirty hair. Make sure hair is clean/dry and keratin fully melted and fused at correct temp.
2. Brittle, crumbly bonds: Overheating or contaminant in the keratin can cause brittleness. Lower temp slightly and ensure powder is fresh and dry.
3. Yellowing / discoloration: Test blond shades on a hidden strand first to confirm color match. Avoid oxidizing agents on the bond.
4. Too much keratin bead: Use smaller beads for a more natural look. Practice rolling/shaping to control bead size.

Professional tips to get better & faster results

• Practice on mannequin hair to perfect bead size and timing before doing clients.
• Use a temperature-controlled fusion iron — consistent temp = consistent bonds.
• Keep a small silicone pad or cloth to roll bonds safely without burning fingers.
• Use the sample pack colors to create custom blends for perfect color matching.

Storage & handling

Keep powder dry and sealed; store in a cool, dry place. (Product page notes it’s ready to use and packaged for professional use.)

Quick-start checklist

• [ ] Clean, dry hair
• [ ] Fusion iron or melting pot set to **~180°C / 350°F**
• [ ] Keratin powder (color matched) ready in melting pot/iron
• [ ] Sectioning clips, comb, tweezers, shaping pad
• [ ] Gloves + ventilation + goggles available
• [ ] Keratin bond remover ready for removal later